Alert: The Plaza Building will remain closed through Jan. 20, 2025.
The Plaza Building will remain closed through Jan. 20, 2025. The Health Center is operating in a modified capacity. Call 303-615-9999 for appointment information during operating hours. Reminder, the Health Center is closed for the winter break Dec. 24 - Jan. 1.
Learn More
Master of Architecture
The STEM-designated Master of Architecture (M.Arch) program is fully accredited by the National Architectural Accrediting Board (NAAB). Our program prepares students for entry into the architecture profession and licensure.
In a rapidly changing world where unprecedented challenges emerge with ever-increasing frequency, the education of an architect must remain adaptive. The University of Colorado Denver Department of Architecture fosters the capacity to ask bold questions, take risks, think independently, and approach the work of architecture with curiosity. In doing so, we strive to be agile, flexible, visually adept thinkers and makers who contribute to addressing global challenges over a lifetime of active, inquisitive learning.
In September 2023, the CU Denver Master of Architecture program was recognized among 22 programs from 14 institutions nationwide to receive a U.S. Department of Energy Zero Energy Design Designation. This designation recognizes college programs that prepare students for 21st-century clean energy-building careers. Learn more about the ZEDD program: https://www.energy.gov/eere/buildings/us-doe-zero-energy-design-designation-programs.
Program Information
We offer two tracks for completing your Master of Architecture (M.Arch) degree based on your experience level. If you have a bachelor's degree that is not in architecture or a related bachelor's degree, you should plan on at least three years to earn your M.Arch degree. If you have a pre-professional bachelor's degree in architecture or a related design field, you may receive advanced standing credit for your previous coursework and can expect to complete your M.Arch degree in about two years. You can learn more about the curriculum for each track below.
Our Master of Architecture is a STEM-designated program, officially approved by the Colorado Board of Higher Education (CIP code: 04.0902). The STEM designation allows our Masters of Architecture students to apply for the Department of Homeland Security’s optional practical training (OPT) extension program for F-1 students with STEM degrees. Upon completion of a STEM-designated degree, students may extend their stay in the United States for an additional 24 months.
Architecture Contacts
Erik Sommerfeld
Associate Professor, Director of Graduate Studies, Director of Design Build Certificate Programs and Initiatives
Program Highlights
Access to Technologies
You will have access to a fully-equipped design fabrication shop and a visual resource center to develop both digital and analog graphics skills. You will learn sketching and drawing as well as the latest parametric and digital fabrication design technologies. You will have opportunities to engage in LIDAR 3-D laser scanning technology to document structures through work in the CAP centers.
Sustainability Focus
You will have a broad range of courses in Leadership in Energy & Environmental Design (LEED) and the opportunity to apply your thinking about carbon-neutral new buildings and renovations to the 2030 Challenge.
Design-Build Certificate
This award-winning program takes you out of the classroom and immerses you in hands-on work for a diverse set of cultures and communities. Projects take place with regional Colorado nonprofits.
Leading Preservation
You will have opportunities to seek training in spatial, technical, and design aspects of the broader field of preservation and adaptive reuse encompassing architecture, cultural landscapes, planning, building technology, project management, documentation, interpretation, and representation.
Hands-on Training
The Aspen Summer Design Workshop puts you to work on weekly sketch problems with noted architects at their offices. You will also have exclusive tours of their built and under-construction projects.
Real-World Engagement
You can gain valuable experience as a paid intern with the college’s University Technical Assistance Program or as a paid research assistant.
International Exploration
We encourage you to think, collaborate, and network globally by offering foreign study courses in locations such as Rome, Finland, Turkey, and Amsterdam.
Recognition and Reward
Your work will be recognized. Build your resume and reputation with Studio Awards, Design Excellence Awards, and AIA Denver’s Young Architects Awards.
Classical Architecture Special Topic Area
Courses qualify students to apply for the Certificate in Classical Architecture from the Institute of Classical Architecture and Art in New York.
Student Work Gallery
Union Station - LiDAR Scanning of Model Train Layouts
Date: 11/1/2012
Principal Researchers:
- Julia Ausloos
In the basement of Union Station, in the LoDo district of downtown Denver, lies two different model train layouts belonging to two distinct model railroading clubs. The first layout is the oldest and one of the largest O Scale (1/4” = 1’ -0”) railroad layouts in the country, called the Colorado Midland Railway. Construction of this model layout began in the 1920s and continues today to be run and maintained by the Denver Society of Model Railroaders. This O Scale layout contains 6500 square feet, including 4000 linear track feet, and exemplifies the vast variations in Colorado’s landscape and geography. The second layout is standard gauge HO scale and was built and continues to be maintained by the Platte Valley and Western Model Railroad Club. The layout contains more than 1000 feet of track, and the railroad and landscape is set in the fall of 1953, the peak of the transition from steam engines to diesel locomotives. Both of the model train layouts consist of complex construction and an array of organically modeled landscapes. The complexity and uniqueness of these layouts lend themselves to be great subjects for LiDAR laser scanning.
The Center of Preservation Research (CoPR) of the University of Colorado Denver scanned the Union Station Model Train Layouts using LiDAR 3D scanning technology. Over a span of four days, CoPR was able to acquire nineteen different scan locations of the two model train layouts, and with those nineteen scan locations 85% coverage of the layouts was achieved. Following the acquisition of point-cloud data by use of LiDAR technology, a number of digital media deliverables were created. Some of these deliverables include: HDR interactive QuickTime videos, high quality scan shots of 3D data, dimensioned 2D orthogonal plan view drawings, and a virtual fly-through tour.
The Center of Preservation Research (CoPR) of the University of Colorado Denver scanned the Union Station Model Train Layouts using LiDAR 3D scanning technology. Over a span of four days, CoPR was able to acquire nineteen different scan locations of the two model train layouts, and with those nineteen scan locations 85% coverage of the layouts was achieved. Following the acquisition of point-cloud data by use of LiDAR technology, a number of digital media deliverables were created. Some of these deliverables include: HDR interactive QuickTime videos, high quality scan shots of 3D data, dimensioned 2D orthogonal plan view drawings, and a virtual fly-through tour.
M. Arch Six Studio Track
This track is for students without a background in architecture.
Curriculum
105 CREDIT HOUR COURSE CURRICULUM
If you are a student without a related bachelor's degree, this track enables you to pursue a professional Master of Architecture degree in a minimum of three years.
The Six Studio Track curriculum for the M.Arch program is divided into six major components totaling 105 semester hours in residence at the University of Colorado Denver.
| Course Type | Semester Hours Required |
| Design Studios and Seminar | 39 semester hours |
| Representational Studies | 6 semester hours |
| Historical/Cultural Studies | 12 semester hours |
| Technological Studies | 21 semester hours |
| Professional Studies | 12 semester hours |
| Electives | 15 semester hours |
A wide array of electives in these areas allows you to tailor your graduate studies to your interests. Of 15 general elective semester hours, nine must be fulfilled with courses taken in the Architecture Department. Students may choose to take elective courses in the summer session. It is highly suggested that students use the summers to study abroad or participate in a professional internship.
M. Arch Four Studio Track
This track is for students with a undergraduate degree in architecture.
Curriculum
60 CREDIT HOUR COURSE CURRICULUM
If you are a student with a pre-professional bachelor's degree, this track enables you to pursue a professional Master of Architecture degree in a minimum of two years.
To qualify for the Four Studio Track M.Arch, you must hold a Bachelor of Science in
Architecture, Bachelor of Art in Architecture, or Bachelor of Environmental Design in Architecture.
Any degrees awarded by universities outside the United States will be reviewed on a case-by-case basis. The admissions committee will determine
the appropriate track.
The Four Studio Track curriculum for the M.Arch program is divided into six major components totaling 60 semester hours in residence at the University of Colorado Denver.
| Course Type | Semester Hours Required |
| Design Studios and Seminar | 27 semester hours |
| Representational Studies Required Elective | 3 semester hours |
| Historical/Cultural Studies Required Elective | 3 semester hours |
| Technological Studies Required Elective | 3 semester hours |
| Professional Studies | 9 semester hours |
| Open Electives | 15 semester hours |
A wide array of electives in these areas allows you to tailor your graduate studies to your interests. Of 15 general elective semester hours, nine must be fulfilled with courses taken in the Architecture Department. Students may choose to take elective courses in the summer session. It is highly suggested that students use the summers to study abroad or participate in a professional internship.
In order for a student to complete the M.Arch course of study within the 60 semester hours (two years of study), a student must have already completed the following courses with a grade of B or better.
- 4 design studios (five or six credits each)
- 2-3 course sequence covering the history of architecture
- 1 course introduction to the theory of architecture
- 2 course sequence on sustainable environmental control systems
- 2 course sequence on structures addressing statics, material mechanics, structural analysis, and design of simple structural elements and systems
- 2 course sequence on building materials and construction
- 1 course on architectural visualization and representation
- 1 course on building information modeling
If any of the above courses have not been completed at the time the student enrolls in the program, the courses will be added onto the 60 semester hours and will need to be completed at the University of Colorado Denver prior to graduation. An official review of the student's previous course work will be conducted in the spring following admissions and will be sent to the student upon the receipt of the student's intent to attend.
Travel Study Opportunities
Tuition & Fees
The University of Colorado Denver has one of the most affordable tuition rates in Colorado. Our tuition and fees are set by the Board of Regents, the governing body of the University of Colorado. Tuition is based on student classification (undergraduate, graduate, academic program, resident or nonresident). You can find out what rates will apply to your situation at the link below.
All CAP Graduate Programs have WICHE-WRGP (Western Regional Graduate Program) status, which grants in-state resident tuition to students from 15 western states including California, Washington, Oregon, and Arizona.
